Видео

Thank you!!

only time using vinyl is for arches . i prefer metal it's easier to put up and can coat it same day. paper is like doing 4 coats unless use a hopper but still need compound to adhere it to the wall and its more expensive . some plus to the paper bead good along shower it doesn't take as much mud to fill them but very hard to cut the edge after coating them. I'll use metal corner bead any day unless was steel stud or area where might not be wood to attach. not necessary to mesh the edges that waste of time just mud it in with thick green usg be fine use enough nails like you said 12-16"

thank you

Great informative video with a great explanation of all the parts of a true radius arch. About to build an arch on an interior doorway with a 73'' run... Subscribed!

I recently purchased the fibafuse tape. There is no mark down the center for "creasability". Has the manufacturer changed this? I actually see in comments below that I guess they stopped adding the crease, but you can still crease it?

Great video, keep doing what you're doing. I heard not to use tap water, do you think that matters Myron?🤔

Do you always use nails for corner bead or are screws ok to use also?

That looks worse than before

Thanx for showing all the steps in the process -- this'll be a good reference video in the future.

in northeast call it a blow out not sure where it got name california patch but they are effective in certain situations. that is a good tip to butter the back of the patch cause you could get a void there where theres no compound if cut the patch too small.

Damn ur smooth ^⁠_⁠^ looks great! Thx for putting these quick tips up.

Very nice presentaion. Thanks!

Ok after you do that, do you still do 3 layers of compound?

I've used paint rollers to apply mud for years, works great. I also use a corner roller to mud corners, then you can use your flusher as usual. I also use smoothing blades for most of he time instead of regular knives. Keep your mud nice and soft and the roller, smoothing blade combo works very well most of the time.

what is that fitting u have on the end of your drill?

It may just be the lighting but does is that compound darker that standard compound? It looks a lot darker than the ceiling. I’ve heard of guys adding color to their mud to help them distinguish the newly applied mud vs the existing painted surface (especially if it’s white). If not in this project, have you ever used colorants like that before? Do you find them useful? And where would you find something like that? I’m a GC and we had a bad experience with a new drywall sub we were trying out and they left huge stripes across a ceiling with a power sander, (it was a very large existing ceiling that had a heavy knockdown that we floated over when we added on to the room) after they sanded, the ceiling looked live waves in the ocean. They couldn’t fix it (we had them try 3 times) so we ended up just fixing it ourselves. In retrospect it would’ve been helpful to have colorant in the mud to be able to see where our new coat of mud covered over their bizarre wavy ceiling, especially for when we sanded it.

Nice job. I have a habit of not leaving enough compound on. I hate sanding like everyone else.

Can the floor panel lift attachment be purchased separately from the hydraulic lift? Anyone know what it’s called?

Thank you for sharing!

Thank you so very much for this video!

You need to use Zinsser / Kilz primer on the repaired patches and then paint.

Why didn’t you show hanging the drywall by yourself like you said you can do. Why say you can do it and not show it.

Game changer since I bought the Festool sander and dust collector. The exhaust fan idea or use a window fan to create negative pressure helps too.

Awesome. Is the concern with heat one of just wanting the mud not to get too hot in summer heat in general? Or is it a concern that the relative difference in temperature between the attic and garage will cause air migration, or having one side cool and one side hot might affect the mud?

Yeah, I get that same insulation machine from HOme Depot. It’s the one to get, it has the on off button on the end of the hose so you can turn the machine off when you are in the attic

Dude black is heaviest green is middle blue is lightest

Bro you have to prime

Nice Video! Very informative!

thank you! I've been using 2 putty knives only 😢

Best tool I found for working on drywall is a 3.5" x 7" smartphone and it allows me to call someone who's good at working on drywall. Really cuts down on the amount of sanding I'll have to do as well.

Can old windows cause the pain to peel from the ceiling?

Awesome. thank for the videos

Just what I needed to know

Did you use the Sheetrock 45 for the whole job?

You connect the wood with only drywall when usually bulkheads are made out of OSB then drywall intalled over it...I guess it will stay intact since it is a small area.

You're fired

Thank you!

Great video, what size nap are you using for your roller?

So the sturdier lift does not hang ceiling drywall? I would need one of each if these devices?

Have you tried killz drywall primer? This brand is around 80-100 dollars right now and am wondering if you can get the same results with a cheaper Porous sealer primer.

Your video was exactly what i needed to see. Thank you! Ive done lots of drywall projects in my homes but now have to remove tile, just like this kitchen, and wasnt sure how to do the fix without removing the countertops. The reinforcement mat is a perfect solution. Yay!

Really appreciate the insight and wisdom. Please keep producing content

came to look at insulation, and couldn't help but see the horrible electrical work. 0:26 wire ran behind the box, sandwiched between it and exterior sheathing. big no-no! other places staples right tight against the wire bend radiuses, where slight pulling could damage the wire outer jacket and kink the conductors. guess inspectors are getting more lax, but they'd have made us rewire much of that in the mid to late 90's. guess that's why they're forcing AFCI down everyone's throats.

Great video. Thank you for sharing your years of experience. Subscribed.

I rewired my house in copper had aluminum wire I just took it to the studs on the walls where outlets were which was most walls. I used this method of rolling over the tape I didn't want to invest in automatic drywall taping machine for one job. Waste more compound but it's not that expensive. Compared to what a contractor wanted to do the job which was $28k dollars. I love doing DIY jobs might take me longer sometimes I have to do it over saves ton of money.

Short and sweet, just the answer I needed! You mentioned you wouldn't have used that tape. Does that mean you'd use the grey mesh tape for some reason, or is there something else I'm not aware of yet? Thank you

Thank you so much, I really did not want to replace a whole section of corner bead for a tiny dent. Definitely doing this.

Mr. Ferguson have you tried the drywall flexible gasket by great stuff pro? Recently gave it a try and was not impressed at all couldn't get it to work.

Mr. Ferguson which collated attachment are you using on the Dewalt screw gun? Thanks for the cool video. Your content in general is invaluable and continues to help me. God bless you.

The legend lives!!!! And is still drywalling!!!!